China Good quality Flexible Flex Fluid Chain Jaw Flange Gear Rigid Spacer Pin HRC Mh Nm Universal Fenaflex Oldham Spline Clamp Tyre Grid Hydraulic Servo Motor Shaft Coupling

Product Description

Flexible Flex Fluid Chain Jaw Flange Gear Rigid Spacer Pin HRC Mh Nm Universal Fenaflex Oldham Spline Clamp Tyre Grid Hydraulic Servo Motor Shaft Coupling
 

Features

Material: cast iron GG25, GG20  steel: C45
Parts: 2 couplings and 1 tire body.
Size from F40-F250. and Type: “B”, “F”, “H”.
Working temp: -20~80ºC
Transmission torque:10-20000N.M
Axial misalignment: D*2%
Radial deviation: D*1%
Angular misalignment:3°-6°
Application: tire couplings are usually used in wet, dusty, under attract, vibration, rotating, and complex working conditions. like:  diesel pump
Installation: easy on, easy off.
Maintenance: no need for lubricating and durability.
 

Product Description

Size Type Bush No. MaxBore Type F&H Type H Serve over
Key
A C D F M
mm Inch L E L E
F40 B 32 33 22 M5 104 82 11
F40 F 1008 25 1″ 33 22 104 82 11
F40 H 1008 25 1″ 33 22 104 82 11
F50 B 38 43 32 M5 133 100 79 12.5
F50 F 1210 32 1 1/4″ 38 25 133 100 79 12.5
F50 H 1210 32 1 1/4″ 38 25 133 100 79 12.5
F80 B 45 55 33 M6 165 125 70 16.5
F80 F 1610 42 1 5/8″ 42 25 165 125 103 16.5
F60 H 1610 42 1 5/8″ 42 25 165 125 103 16.6
F70 B 50 47 35 M8 187 142 80 60 11.5
F70 F 2012 50 2″ 44 32 187 142 80 50 11.5
F70 H 1810 42 1 5/8″ 42 25 187 142 80 50 11.5
F80 B 60 55 42 M8 211 165 98 54 12.5
F80 F 2517 80 2 1/2″ 58 45 211 165 98 54 12.5
F80 H 2012 50 2″ 45 32 211 165 98 54 12.5
F90 H 70 63.5 49 M10 235 188 108 62 13.5
F90 F 2517 60 2 1/2″ 58.5 45 235 188 108 62 13.5
F90 H 2517 60 2 1/2″ 58.5 45 235 188 108 62 13.5
F100 H 80 63.5 49 M10 235 188 120 62 13.5
F100 F 3571 75 3″ 64.5 51 235 188 125 62 13.5
F100 H 2517 60 2 1/2″ 58.5 45 235 188 113 62 13.5
F110 B 90 75.5 63 M12 279 233 128 62 12.5
F110 F 3571 75 3″ 63.5 51 279 233 134 62 12.5
F110 H 3571 75 3″ 63.5 51 279 233 134 62 12.5
F120 B 100 84.5 70 M12 314 264 140 67 14.5
F120 F 3525 100 4″ 79.5 65 314 264 144 67 14.5
F120 H 3571 75 4″ 85.5 51 314 264 144 67 14.5
F140 B 130 110.5 4 M16 359 311 178 73 16
F140 F 3525 100 4″ 81.5 65 359 311 178 73 16
F140 H 3525 100 4″ 81.5 65 359 311 178 73 18
F160 B 140 117 102 M20 402 345 187 78 16
F160 F 4030 115 4 1/2″ 92 77 402 345 197 78 16
F160 H 4030 115 4 1/2″ 92 77 402 345 197 78 16
F180 B 150 137 114 M16 470 394 205 94 23
F180 F 4536 125 5″ 112 89 470 394 205 94 23
F180 H 4535 125 5″ 112 89 470 394 205 94 23
F200 B 150 138 114 M20 508 429 205 103 24
F200 F 4535 125 5″ 113 89 508 429 205 103 24
F200 H 4535 125 5″ 113 89   508 429 205 103 24
F220 B 160 154.5 127 M20 562 474 223 118 27.5
F220 F 5571 125 5″ 129.5 102 562 474 223 118 27.5
F220 H 5571 125 5″ 129.5 102 562 474 223 118 27.5
F250 H 190   161.5 132 M20 628 522 254 125 29.5

 

Related Products

 

 

Company Profile

 

FAQ

Q: How to ship to us?
A: It is available by air, sea, or train.

Q: How to pay the money?
A: T/T and L/C are preferred, with different currencies, including USD, EUR, RMB, etc.

Q: How can I know if the product is suitable for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.

Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.
 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Standard Or Nonstandard: Standard
Shaft Hole: 25-190
Torque: 10-30N.M
Samples:
US$ 5/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

China Good quality Flexible Flex Fluid Chain Jaw Flange Gear Rigid Spacer Pin HRC Mh Nm Universal Fenaflex Oldham Spline Clamp Tyre Grid Hydraulic Servo Motor Shaft Coupling

mh coupling

Are there any safety considerations when using flexible couplings in rotating machinery?

Yes, there are several safety considerations to keep in mind when using flexible couplings in rotating machinery. While flexible couplings offer numerous benefits in terms of misalignment compensation, vibration isolation, and shock absorption, improper use or maintenance can lead to safety hazards. Here are some important safety considerations:

  • Proper Installation: Ensure that the flexible coupling is installed correctly and securely following the manufacturer’s guidelines. Improper installation can lead to coupling failure, unexpected disconnection, or ejection of coupling components, which may result in equipment damage or injury to personnel.
  • Alignment: Proper shaft alignment is essential for the reliable and safe operation of flexible couplings. Misaligned shafts can cause excessive stress on the coupling and connected components, leading to premature wear and possible failure. Regularly check and maintain proper shaft alignment to prevent safety risks.
  • Operating Conditions: Consider the environmental and operating conditions of the machinery when selecting a flexible coupling. Some couplings are designed for specific temperature ranges, hazardous environments, or corrosive atmospheres. Using a coupling that is not suitable for the operating conditions can compromise safety and performance.
  • Torque and Speed Limits: Always operate the flexible coupling within its specified torque and speed limits. Exceeding these limits can cause coupling failure, leading to unexpected downtime, equipment damage, and potential safety hazards.
  • Maintenance: Regularly inspect and maintain the flexible coupling to ensure its continued safe operation. Check for signs of wear, damage, or corrosion, and promptly replace any worn or damaged components with genuine parts from the manufacturer.
  • Emergency Stop Mechanism: In applications where safety is critical, consider implementing an emergency stop mechanism to quickly halt machinery operation in case of coupling failure or other emergencies.
  • Personal Protective Equipment (PPE): When working with rotating machinery or during maintenance tasks involving couplings, personnel should wear appropriate PPE, such as gloves, eye protection, and clothing that can resist entanglement hazards.
  • Training and Awareness: Ensure that personnel working with the machinery understand the potential hazards associated with flexible couplings and receive proper training on safe handling, installation, and maintenance procedures.

By adhering to these safety considerations, operators and maintenance personnel can mitigate potential risks and ensure the safe and reliable operation of rotating machinery with flexible couplings. Additionally, it is essential to comply with relevant safety standards and regulations specific to the industry and application to ensure a safe working environment.

mh coupling

How does a flexible coupling impact the overall reliability of connected equipment?

A flexible coupling significantly impacts the overall reliability of connected equipment in several ways:

  • Misalignment Compensation: Flexible couplings can accommodate both angular and parallel misalignment between connected shafts. By allowing for misalignment, the coupling reduces the stress and wear on bearings, seals, and other rotating components. This feature prevents premature failure of these components, contributing to improved reliability and extended equipment lifespan.
  • Vibration Damping: Flexible couplings possess inherent damping properties due to their elastomeric or flexible elements. These elements absorb and dissipate vibrations generated during the operation of machinery. By dampening vibrations, the coupling protects the connected equipment from excessive oscillations, reducing fatigue and preventing mechanical failures. This enhanced vibration control increases the reliability of the system.
  • Shock Load Absorption: In applications with sudden load variations or shock loads, such as in heavy machinery or high-speed equipment, a flexible coupling acts as a shock absorber. It can absorb and dissipate the impact energy, protecting the machinery from damage caused by sudden loads. The ability to absorb shock loads contributes to the overall reliability of the connected equipment.
  • Reduced Wear and Tear: The flexibility of the coupling minimizes stress and wear on rotating equipment. It allows for slight movements and misalignments, reducing friction and stress on bearings and other critical components. This reduction in wear and tear lowers the frequency of maintenance and replacement, increasing the overall reliability of the equipment.
  • Compensation for Thermal Expansion: Temperature changes in machinery can lead to thermal expansion or contraction of shafts. A flexible coupling can compensate for these thermal effects, ensuring that the machinery remains properly aligned even as temperature conditions fluctuate. This compensation prevents binding and misalignment, promoting reliable performance.
  • Protection Against Overloads: Flexible couplings help protect connected equipment from overloads and torsional vibrations. They act as a mechanical fuse, disconnecting the driveline when an overload occurs, thus preventing damage to expensive machinery. This safety feature enhances the overall reliability and reduces the risk of catastrophic failures.
  • Easy Maintenance and Alignment: Flexible couplings are designed for easy installation and alignment. This feature simplifies maintenance procedures, making it easier to inspect and replace couplings when necessary. Properly aligned couplings lead to improved equipment performance and longevity, enhancing overall reliability.

By compensating for misalignment, damping vibrations, absorbing shock loads, reducing wear and tear, and providing other protective features, a flexible coupling significantly improves the reliability of connected equipment. It extends the lifespan of critical components, minimizes downtime, and ensures smooth and efficient operation, making it a valuable component in various industrial applications.

mh coupling

What materials are commonly used in manufacturing flexible couplings?

Flexible couplings are manufactured using a variety of materials, each offering different properties and characteristics suited for specific applications. The choice of material depends on factors such as the application’s requirements, environmental conditions, torque capacity, and desired flexibility. Here are some of the commonly used materials in manufacturing flexible couplings:

  • Steel: Steel is a widely used material in flexible couplings due to its strength, durability, and excellent torque transmission capabilities. Steel couplings are suitable for heavy-duty industrial applications with high torque requirements and harsh operating conditions.
  • Stainless Steel: Stainless steel is often used to manufacture flexible couplings in environments with high corrosion potential. Stainless steel couplings offer excellent resistance to rust and other corrosive elements, making them ideal for marine, food processing, and chemical industry applications.
  • Aluminum: Aluminum couplings are lightweight, have low inertia, and provide excellent balance. They are commonly used in applications where reducing weight is critical, such as aerospace and robotics.
  • Brass: Brass couplings are known for their electrical conductivity and are used in applications where electrical grounding or electrical isolation is required, such as in certain industrial machinery or electronics equipment.
  • Cast Iron: Cast iron couplings offer good strength and durability and are often used in industrial applications where resistance to shock loads and vibrations is necessary.
  • Plastic/Polymer: Some flexible couplings use high-performance polymers or plastics, such as polyurethane or nylon. These materials provide good flexibility, low friction, and resistance to chemicals. Plastic couplings are suitable for applications where corrosion resistance and lightweight are essential.
  • Elastomers: Elastomers are used as the flexible elements in many flexible couplings. Materials like natural rubber, neoprene, or urethane are commonly used as elastomer spider elements, providing flexibility and vibration damping properties.

The selection of the coupling material depends on the specific needs of the application. For instance, high-performance and heavy-duty applications may require steel or stainless steel couplings for their robustness, while applications where weight reduction is crucial may benefit from aluminum or polymer couplings. Additionally, the choice of material is influenced by factors such as temperature range, chemical exposure, and electrical requirements in the application’s operating environment.

Manufacturers typically provide material specifications for their couplings, helping users make informed decisions based on the specific demands of their applications.

China Good quality Flexible Flex Fluid Chain Jaw Flange Gear Rigid Spacer Pin HRC Mh Nm Universal Fenaflex Oldham Spline Clamp Tyre Grid Hydraulic Servo Motor Shaft Coupling  China Good quality Flexible Flex Fluid Chain Jaw Flange Gear Rigid Spacer Pin HRC Mh Nm Universal Fenaflex Oldham Spline Clamp Tyre Grid Hydraulic Servo Motor Shaft Coupling
editor by CX 2023-09-27